SaltDogg® 6-16 Cubic Yard Hydraulic Conveyor Chain Spreade

• Designed for dump bodies and flatbeds with a minimum 26,000 lb GVW (gross vehicle weight).
• Available with 108 in., 120 in., 144 in., or 168 in. hoppers with a capacity from 6 to 16 cubic yards.
• Hydraulic power with two independent motors for conveyor and spinner operation. Your choice of three gearbox ratios.
• Spreads bulk salt, bulk sand, and 50/50 salt/sand mix.
• Hydraulic spreader controls sold separately with variety of options available.
• 18 in. poly spinner broadcasts up to 30 ft, using with a height adjustable chute.
• Versatile 24 in. wide chain conveyor drive.
• Stainless steel, adjustable inverted V reduces stress on the drive line and improves flow.
• High quality, 304 stainless steel construction for optimum corrosion resistance.
• Heavy duty 3/8 in. hinged top screens with 2-1/2 in. openings.
• Spreader is shown with optional light bar (8891167) , and pre-wet system (LS4) which are sold separately.
• Made in the USA.

Buyers  Products SaltDogg 6-16 Cubic Yard Hydraulic Conveyor Chain Spreader  gives municipalities and large contractors a high-volume, heavy duty  spreader ready for use with a truck's existing central hydraulic system.  The 108 in., 120 in., 144 in., or 168 in. hoppers are designed for 96  in. wide dump bodies and flatbeds with a minimum 26,000 lb GVW (gross  vehicle weight) chassis.

The hopper and fully welded frame are  made from high quality 304 stainless steel for long lasting corrosion  protection. Six heavy duty hinged-top screens with 2-1/2 in. openings  help break up clumps of material during bulk loading.

A high-flow  24-1/2 in. wide steel pintle chain conveyor provides a high speed  material flow. The stainless steel inverted V reduces stress on the  drive line to reduce wear and improve flow. A screw jack adjustable feed  gate offers additional material flow control.

The conveyor is  driven by a hydraulic motor with your choice of a 25:1 or 50:1 worm gear  box, or a 6:1 spur gear box. The heavy duty driveline is built with a 2  in. drive shaft and a 1-1/2 in. spring loaded idler shaft with bearings  and 8-tooth sprockets.

The spreader is equipped with a 20 in.  poly spinner or an optional stainless steel spinner. It can spread  material 2 to 40 ft. The baffles and spinner chute height are adjustable  to suit your application. The chute and spinner assembly flips up or  detaches completely for convenient bulk unloading, easy servicing, and  access to towing.

Hydraulic spreader controls are sold  separately. A variety of options are available, including manual  hydraulic, manual with load sensing, and electric over hydraulic,  available with or without GPS. See Related Products below.
 

• Designed for dump bodies and flatbeds with a minimum 33,000 lb GVW (gross vehicle weight).
• Available with 120 in.,132 in.,144 in., or 168 in. hoppers with a capacity from 7 to 10 cubic yards..
• Hydraulic power with two independent motors for auger and spinner operation.
• Spreads bulk salt.
• Hydraulic spreader controls sold separately with variety of options available.
• 18 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.
• Heavy duty 7 in. carbon steel auger with 1/2 in. flighting.
• Adjustable chute and baffles let you tailor height and spread pattern.
• High quality, 304 stainless steel construction for optimum corrosion resistance.
• Includes six 3/8 in. heavy duty hinged-top screens with a 4 in. peak. 
• Made in the USA.

Buyers  Products SaltDogg 7-10 Cubic Yard Hydraulic Auger Spreader gives  contractors and municipalities a high-volume spreader with a heavy duty  auger. The spreader uses a truck's existing central hydraulic system.  The 120 in., 132 in., 144 in., or 168 in. hoppers are designed for dump  bodies and flatbeds with a minimum 33,000 lb GVW (gross vehicle weight)  chassis.

The hopper and fully welded frame are made from high  quality 304 stainless steel for long lasting corrosion protection. Six  heavy duty hinged top screens help break up clumps of material during  bulk loading.

The 7 in. carbon steel auger features a  multi-pitch design with 1/2 in. hard-faced flighting. It's driven by a  hydraulic motor with your choice of a 25:1 or 50:1 worm gear box, or a  6:1 spur gear box. An 18 in. poly spinner powered by a direct mount  hydraulic motor spreads material 2 to 30 ft. The adjustable spinner  chute and baffles allow you to adjust the spinner height and spread  pattern to your application. The chute and spinner assembly flips up for  convenient bulk unload, easy servicing, and access to towing. 

• Designed for dump bodies and flatbeds with a minimum 26,000 lb GVW (gross vehicle weight).
• Available with 120 in. or 144 in. hopper with a capacity from 7 to 9 cubic yards.
• 12V DC-powered electric drive with independent conveyor and spinner motors.
• Spreads bulk salt, bulk sand, and salt/sand mix.
• In-cab controls with independent variable speeds for the conveyor and spinner. 
• Adjustable chute and baffles let you tailor height and spread to your application.
• Versatile 24-1/2 in. wide chain conveyor drive with 20 in. poly spinner broadcasts up to 40 ft.
• High quality, 304 stainless steel construction for optimum corrosion resistance.
• Stainless steel, adjustable inverted V reduces stress on the drive line and improves flow.
• Heavy duty hinged top screens.
• Spreader  is shown with optional spreader stand (3027468), light bar (8891168) ,  and pre-wet system (LS5) which are sold separately.
• Made in the USA.

Product Overview
Buyers  Products SaltDogg 7-9 Cubic Yard Electric Conveyor Chain Spreader gives  contractors and municipalities a heavy duty electric spreader ready for  commercial use. The 120 in. or 144 in. hoppers are designed for dump  bodies and flatbeds with a minimum 26,000 lb GVW (gross vehicle weight)  chassis. The spreader strikes a balance between the convenience and  value of an electric spreader and the robust volume traditionally found  in gas and hydraulic spreaders.

The hopper and fully welded  frame are made from high quality 304 stainless steel for long lasting  corrosion protection. Four hinged-top screens with 3/8 in. bars are  included to help break up clumps of material during bulk loading..

The  spreader features a high-flow steel pintle chain conveyor with a  stainless steel inverted V that reduces stress on the drive line to  improve flow. The conveyor is 24-1/2 in. wide with 3/8 in. crossbars and  has a stainless steel floor. An independent 3/4 HP electric motor keeps  the chain moving, and an adjustable feedgate with lock pin offers  additional material flow control.

An 18 in. poly spinner,  powered by its own 1/2 HP electric motor, spreads material 2 to 30 ft.  The spreader is available with a regular or extended chute. Two  adjustable baffles allow you to cater the spread pattern to your use.  The chute and spinner assembly flips up or detaches completely,  tool-free, for convenient bulk unload, easy servicing, and access to  towing.

The spreader is controlled by a heavy duty, in-cab controller with independent variable speeds for the conveyor and spinner.  

• Works with dump trucks and flatbeds with minimum 25,999 lb GVW (gross vehicle weight).
• Durable poly hopper with stainless steel frame and auger trough.
• 12V DC-powered electric drive independent 3/4 HP auger/chain motor, and 1/2 HP spinner motor..
• Auger model can drive bulk salt or a 50/50 salt/sand mix.
• In-cab closed-loop controller with independent conveyor/auger and spinner speeds, and vibrator control.
• 14 in. spinner broadcasts material up to 30 ft.
• Available in both variable pitch full length auger and high flow pintle chain models.
• Vibrators, top screens, inverted V,  and remote auger bearing grease kit included.
• Vinyl tarp kit and spreader tie down kit sold seperately.
• Backed with a 2 year warranty.
• Made in the USA.

Buyers  Products SaltDogg SHPE6000CH Electric Poly Hopper Spreader gives  contractors, property managers, and municipalities a powerful 6 cubic  yard spreader for commercial and municipal use. The high flow pintle  chain conveyor can drive bulk salt or a 50/50 salt/sand mix at a flow  rate of 600 lb per minute. The spreader works with dump trucks and  flatbeds with a minimum 25,999 GVW (gross vehicle weight). Its  electric-powered design means quieter operation with no need for  refueling or engine servicing, giving you more time on the road.

The  patented double-wall poly hopper is supported by a corrosion-resistant  stainless steel frame and includes two steel top screens to help break  up clumps of material during bulk loading. It features a 6 in. steel  variable pitch auger with a stainless steel trough. An independent 3/4  HP motor powers the auger. The included inverted V and 900 lb vibrator  help break up clumps and keep material flowing. A 14 in. polymer  spinner, powered by an independent 1/2 HP, 12V motor, spreads material 5  to 30 ft.

The SHPE6000CH features a chute with an open trough  and stainless steel spinner shield. The spinner assembly can be easily  removed for cleaning and storage. The vibrator and independent conveyor  and spinner speeds are controlled by an in-cab controller.